* Regardless of whether you buy our products, as long as you have questions related industries, we will sincerely to answer your questions*
1. There may be three reasons for the metal clash in the lower part of the jaw crusher
when the jaw crusher idles.
a. When there is clash between moving jaw plate and fixed jaw plate, it results from tightness of the discharging port. Thus, it should b.
1. Rock and minerals must be given to the middle of the distributor. It is not allowed to directly convey rock and minerals ore into the crushing chamber, because it is easy to overload the crusher and make the liner wear unevenly.
2. Capacity of Cone.
Cone crusher is widely used in metallurgical industry, construction industry, road building industry, chemical industry and phosphate industry. d
It is suitable for crushing hard and medium hard rock and minerals, such as iron ore, copper ore, limesto.
1. The cone crusher equipment should be equipped with the iron remover device. The iron will cause shaft failure. Moreover, it should be reasonablely distributed so as to maximize the efficiency of the stone crushing plant.
2. The temperature of lubric.
The common faults of liner include wear, uneveness, deformation, breakage. Generally, when the wear of liner is more than half, it needs to be replaced. When replacing liners, the cone crusher needs to be stopped.
1. When installing the new lining plat.
Fine impact crusher is a kind of crushing equipment that crushes the materials by utilizing the impact energy.
During operation, the motor drives the rotor to rotate at a high speed. When the material enters effecting area of the blow bars, it is brok.